The Mulco Adhesive Selection Chart can be found below. Here’s the signification of the various codes listed on the chart.

1 Excellent
2 Very Good
3 Good
x May be used on the surfaces or in the environment indicated.

If several choices apply, consult the Characteristics Chart to determine the best suited product for your customer’s needs.

Mulco Adhesive Selection Chart

The following two charts display the main characteristics of Mulco adhesives. You can consult these charts to help you choose the adhesive best suited for your customer.

Mulco Water-Based Adhesive Characteristic Chart

(1) Continuous moisture release may hinder the adhesive’s drying process or cause problems sooner than later. On the other hand, you can apply the product on a humid surface if the moisture comes from the preparation. In such case, the presence of moisture will increase the adhesive’s drying time.
(2) The presence of moisture in materials slows down the product drying process.

Mulco Solvent-Based Adhesive Characteristic Chart

(1) The rate of drying depends on the air moisture content. (2) The presence of moisture in materials may speed up the product drying time. The presence of too much moisture in materials will cause an adverse chemical reaction that will produce bubbling.