Flood® CWF-UV®

Ideal for newer wood, Flood CWF-UV adds subtle color and highlights the natural wood grain. It also penetrates and protects against moisture and sun damage. See the product label for more information and details regarding application.Things You'll Need To Know:

• Application Options
  • Synthetic brush
  • Roller
  • Airless sprayer
• Application Tips
  • To avoid lap marks, always work the entire length of a board while maintaining a wet edge. Never stop application in the middle of the board.
  • Vertical surfaces should be coated from top to bottom.
• Cleanup
  • Clean tools with soap and water.
• Important Notes
  • Wear safety glasses.
  • Do not apply CWF-UV in direct sunlight or on hot surfaces.
  • CWF-UV is for exterior use only; do not use it indoors.
• Weather Requirements
  • Apply CWF-UV in temperatures between 50° and 90° F.
  • Do not apply CWF-UV if cold and/or wet weather is expected within 24 hours.

Step-by-step instructions:

1. Cover everything you do not wish to coat, including plants.
2. Make sure the wood surface has been properly prepared and is completely dry.
3. For color uniformity, intermix all containers being used, and do not thin the product.
4. Stir the finish before and periodically during application.
5. Test the color, if applicable, in a small area.
6. Apply an even coat with a synthetic brush, roller or airless sprayer, avoiding heavy application.
7. After spray application, backbrush or backroll to improve penetration and uniformity of coverage. Remember, Flood CWF-UV is not a surface coating. It protects by penetrating the wood surface.
8. For porous or older wood, if required, apply a second coat before the first coat has dried (within 20 minutes).
9. Allow the finish to dry for 24 to 48 hours.

‍